BEST Robotics Forum
Register Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
dmgauntt

Junior Member
Registered:
Posts: 21
Reply with quote  #1 
I am building a partial practice field for our team, and went to Home Depot to get the U-bolts specified in the Bill of Materials (118-042).  However, it is 1-5/8" center-center distance, rather than 1-3/8" center-center.  What is the correct part number?
0
jgraber

Moderator
Registered:
Posts: 112
Reply with quote  #2 
The field guy reads the Q&A, so you could ask there.
Page 78 of BET*DRAWING PACKAGE_REV_A.pdf lists a 1-3/8" center to center Ubolt that is used as a hinge for the start-gate/pig-pen, with the goal being to surround a 1/2" PVC pipe.
  At the big box stores, details of the part numbers seem to change from time to time and place to place and online to physical.
0
dmgauntt

Junior Member
Registered:
Posts: 21
Reply with quote  #3 
I found a couple of parts at Home Depot that work.

SKU 372088: Crown Bolt 30204
$2.79 each stainless steel  1/4" x 1-1/8" x 2".  The 1-1/8" is the inside width of the bolt, so the center-center distance is 1-3/8"

SKU 117979: Home Depot #308
$0.98 each, zinc plated steel, 1/4" x 1-1/8" x 2-1/16".  Slightly too long, but nothing that a Dremel can't fix.
0
Previous Topic | Next Topic
Print
Reply

Quick Navigation: